LEDGlow's Red Marine Boat LED Lighting Kit features waterproof tubes that utilize ultra-bright red SMD LEDs adding a solid color glow to your boat's deck or interior.
LEDGlow's Red Marine Boat LED Lighting Kit is offered in 2, 4, 6 or 8 piece kits featuring waterproof tubes that add a crisp, vibrant red illumination to your boat's deck or interior as well as increased visibility when out on the water at night. Each tube features a length of 24", 0.7" wide and 0.45" in depth making them easy to install and hide. The featured SMD LEDs are extremely energy efficient and draw very low amperage so you won't have to worry about these boat LED lights draining the battery. This marine LED lighting kit includes a 10' lead power wire that connects to any constant or switched 12 volt power source. Once the lead power wire is connected to power, installing each tube is as easy as daisy chaining each tube to the next in sequence. What really sets this LED boat lighting kit apart from the competition is the included modular male to female connectors that utilize screw caps and o-rings for a completely watertight connection. The included tubes with dual connectors are to be installed in the middle of the daisy chain sequence and the single connector tubes are the end of the sequence. Each LED light tube can be easily mounted to any location using the included 3M tape and mounting brackets. LEDGlow includes installation instructions, free lifetime technical support and a one year limited warranty with each purchase.
LEDGlow's Marine Lighting Kit Wire Extensions easily connect to the power wires of the tubes, extending the power wires in additional 2', 6' or 9' lengths!
LEDGlow offers 3M Adhesion Promoter which creates an extra layer of adhesion between the 3M tape of the tube and the location where the tube will be installed. This promoter is not required for installation, but gives additional strength to the 3M tape.
Red Marine Boat LED Lighting Kit Includes:
- 24" Waterproof Tubes
- 36 Ultra-Bright Red SMD LEDs per Tube
- 10' Lead Power Wire
- 9" Power Wires per Tube
- Middle Tubes Feature Dual Connectors
- End Tubes Feature Single Connector
- Male to Female Screw Cap Connectors with O-Rings
- Watertight Connections
- Tubes are 0.7" Wide & 0.45" in Depth
- Installation Instructions
- Free Lifetime Technical Support
- One Year Limited Warranty
These Wiring Extensions will add 2’, 6’ or 9’ lengths to the Marine Lighting Kit’s Power Wire or between each tube. The wire extensions feature male to female screw-cap connectors with o-rings that allow for a watertight seal.
- Extends Length of Power Wire or Tube Wires by 2’, 6’ or 9’ Lengths
- Screw-Cap Connectors with O-Ring - Watertight Seal
Adhesion Promoter provides additional strength by creating a stronger bond between the light strip and mounting location that will last over time, rather than just using the provided double-sided tape. This promoter is available from 1 packet all the way up to 12 packets and not required for installation.
- Provides Additional Adhesion Strength Between the LED Light & Mounting Location
- Available from 1, 3, 6, 9 or 12 Promoter Packets