Single Color Options
The comprehensive single color illumination of LEDGlow’s golf cart LED kits is ideal for anyone looking to add a powerful glow to the underbody of their golf cart. With these golf cart LED light strips, you’ll experience defined single colors that fully accentuate the underside of your cart, courtesy of 80 wide angle LEDs housed in 24 inch flexible tubes. These LED accent lighting kits for golf carts are ideal for anyone looking for the benefits and simplicity of having a kit installed to their vehicle with individual color illumination. LEDGlow also carries distinct colors such as Pink and Orange, which are sometimes more difficult to find. Choose from a variety of other single color selections including Blue, Red, Green, White, Purple and Yellow. Each kit also features (3) Fading Modes, (3) Strobing Modes, and a Sound Activation Mode.
How Do I Install LEDGlow Golf Cart Underglow Lights?
LEDGlow is here to walk you through the installation of our golf cart underglow accent lights with step-by-step instructions that detail the entire process. Begin by verifying voltage with a multimeter before connecting the kit to the golf cart. Then start with the front tube and mount it with plenty of clearance from heat sources or moving parts. The flexible tube can be contoured in case the undercarriage is not flat. Make sure that the wires are routed away from any moving parts or exhaust. For gas powered golf carts, leave at least 10 inches between the exhaust and the tube. Also, be sure to keep all wires and tubes away from any steering suspension parts. You can use the supplied self- tapping screws, zip ties, or both to hold the tubes in place. If you use the provided screws, use a zip tie to secure the tube as well. Then proceed with installing the remaining three underglow tubes using the same steps. It is crucial to ensure that all of the wires do not come in contact with any moving parts or heat. We recommend routing all four of the golf cart tube’s wiring to the same location -- where the control box is going to be mounted. Secure any excess tube wiring using the included zip ties. Then find a safe, secure and dry location to mount the control box. Please note that the control box was not designed to withstand water or the elements. Connect the red wire from the control box to a 12 volt power source. If a 12 volt source is not available, a step-down transformer is required which is available at any electronic store.
What's Included with LEDGlow Golf Cart LED Underbody Lights?
LEDGlow single color golf cart underglow kits come with everything required for installation of these EZGO, Yamaha, Club Car LED light kits and more. In addition to the (4) 24” water-resistant flexible tubes which the base kit is comprised of, you’ll also receive the Control Box and a Wireless Remote. The Control Box is programmed with Solid Color Illumination plus lighting effects including Fade Modes, Strobe Modes and Sound Activation Mode. You will also receive the self-tapping screws and zip ties for the installation of each golf cart underglow lighting tube.
Create Custom Patterns with LEDGlow Single Color Golf Cart LED Lights
One of the unique features of our golf cart underglow lights is the ability to create fully customizable lighting patterns to enhance the look of your cart with the lighting configuration that works best for your gas and electric golf cart lights. In addition to Solid Color Illumination Mode, you can add Fade and Strobe Modes, each of which are equipped with different settings. Sound Activation Mode enables the LED lighting to react to the beat of the music playing inside of your golf cart for a truly one-of-a-kind experience. Showcase your vehicle with these EZGO, Yamaha, Club Car Precedent LED Light Kits and more.