LEDGlow's Truck Bed LED Lighting Kit features 48 ultra-bright white LEDs housed in 8 low profile pods that will illuminate your entire truck bed, giving you increased visibility for working after the sun goes down.
Ditch the Flashlight
LEDGlow’s 8 Piece LED Truck Bed Lighting Kit illuminates the entire bed of your truck with a flip of a switch, allowing you to work after dark without having to hold a flashlight or plug in a portable work light. This truck bed lighting system includes 2 separate strands of 4 pod lights with 6 SMD LEDs per pod, giving you a total of 8 pods and 48 ultra-bright white SMD LEDs.
Waterproof Pod Lights
Each 1.4" square truck bed lighting pod is 100% waterproof and only .20" thick making them extremely easy to hide, unlike the competition that uses a larger pod light that hangs below the bed rails. Each truck bed light strand includes 2' of wire between each pod, totaling 6' of wire, and features 21' of power wire, giving you plenty of length when it comes to running the power wires into your cab and to the included on/off switch. Each pod is effortlessly mounted under your bed rails using either the included 3M tape or screws.
LEDGlow's Customer Guarantee
LEDGlow includes a one year limited warranty and free lifetime technical support with each purchase.
Truck Bed Lighting Kit Includes:
- (2) Strands of 4 LED Truck Bed Lighting Pods
- Total of 8 Pods and 48 Ultra-Bright White SMD LEDs
- Pods are 1.4" x 1.4" and .20" Thick
- Completely Waterproof
- Easy to Use On/Off Switch
- 21' of Power Wire per Strand
- 2' of Wire Between Each Pod Totaling 6' of Wire
- Mounting Hardware
- Installation Instructions
- Free Lifetime Technical Support
- One Year Limited Warranty
The Magnetic Power Switch allows you to automatically power the truck bed LED lights on by simply opening your truck’s tailgate. When you’re done using the lights, close the tailgate and the magnetic switch automatically cuts power to the kit and turns the lights off. This switch will not interfere with the operation of the tailgate.
- Automatically Powers Truck Bed Lights By Opening Tailgate
- Does Not Interfere with Operation of Tailgate
- Includes Magnetic Switch with 13’ of Wire, Magnetic Receiver, Double-Sided Tape & Screws
Using the Cigarette Lighter Adapter is a quick and easy solution to power your interior lighting kit from the cigarette lighter receptacle. This accessory features 3-1/2’ of wiring and also helps you avoid running the kit’s power wires to the vehicle’s battery. Simply crimp the kit’s power and ground wires into the quick-crimp connectors, insert those into the butt-connectors and the adapter into the cigarette lighter port! It’s that easy!
- Powers Interior Lights Directly from the Cigarette Lighter Receptacle
- Includes 3-1/2’ of Wiring with Butt-Connectors & Quick-Crimp Connectors
Using an Expandable Circuit allows you to power your kit from your vehicle’s fuse box without having to cut or splice into your factory wiring. The expandable circuit functions by replacing an existing fuse in the fuse panel to gain power from and then inserting the factory fuse into the open slot on the expandable circuit. The Expandable Circuit features ATO (ATC), Mini, Low Profile Mini, Micro2 and Micro3 fuse sizes, while also including a 4 amp fuse (Micro2 & Micro3 includes 5 amp fuse) for circuit protection.
- Powers Lights from Fuse Box
- Expandable Circuit Sizes: ATO (ATC), Mini, Low Profile Mini, Micro2 & Micro3
- Includes 4 Amp Fuse (Micro2 & Micro3 Includes 5 Amp Fuse)
Adhesion Promoter provides additional strength by creating a stronger bond between the light strip and mounting location that will last over time, rather than just using the provided double-sided tape. This promoter is available from 1 packet all the way up to 12 packets and not required for installation.
- Provides Additional Adhesion Strength Between the LED Light & Mounting Location
- Available from 1, 3, 6, 9 or 12 Promoter Packets
Easy to install, especially on a Super Duty with upfitter switches.Posted by PHILIP CLOYD on
Great lights - easy to install
Installed these on my 2015 Tacoma which has a bed cover. Bright lights, very easy to install. Added a pin switch on the gate for automatic on/off. Magnet switch not quite the right size. Great product. Great customer service.Posted by Unknown on
these lights are highly adaptable for other locations other the bed of your truck . i put them in my old jeep because the factory interior light was so dim, may need some shades.Posted by TROY M SCOTT on
Very good product
Everything in one box easy install good kit thanks.Posted by Unknown on
LED Truck Bed Lights
I wanted to install some after market truck bed lights since my truck did not come with any. Did a google search and landed on LED GLowPosted by Steve on
The product was priced fair, good instructions and delivery was in three days. Easy to install, glad to see they included screws for mounting the pods and their bright.
Showing reviews 1-5 of 24 | Next