LEDGlow's Truck Bed LED Lighting Kit features 48 ultra-bright white LEDs housed in 8 low profile pods that will illuminate your entire truck bed, giving you increased visibility for working after the sun goes down.
Ditch the Flashlight
LEDGlow’s 8 Piece LED Truck Bed Lighting Kit illuminates the entire bed of your truck with a flip of a switch, allowing you to work after dark without having to hold a flashlight or plug in a portable work light. This truck bed lighting system includes 2 separate strands of 4 pod lights with 6 SMD LEDs per pod, giving you a total of 8 pods and 48 ultra-bright white SMD LEDs.
Waterproof Pod Lights
Each 1.4" square truck bed lighting pod is 100% waterproof and only .20" thick making them extremely easy to hide, unlike the competition that uses a larger pod light that hangs below the bed rails. Each truck bed light strand includes 2' of wire between each pod, totaling 6' of wire, and features 21' of power wire, giving you plenty of length when it comes to running the power wires into your cab and to the included on/off switch. Each pod is effortlessly mounted under your bed rails using either the included 3M tape or screws.
LEDGlow's Customer Guarantee
LEDGlow includes a one year limited warranty and free lifetime technical support with each purchase.
Truck Bed Lighting Kit Includes:
- (2) Strands of 4 LED Truck Bed Lighting Pods
- Total of 8 Pods and 48 Ultra-Bright White SMD LEDs
- Pods are 1.4" x 1.4" and .20" Thick
- Completely Waterproof
- Easy to Use On/Off Switch
- 21' of Power Wire per Strand
- 2' of Wire Between Each Pod Totaling 6' of Wire
- Mounting Hardware
- Installation Instructions
- Free Lifetime Technical Support
- One Year Limited Warranty
The Magnetic Power Switch allows you to automatically power the truck bed LED lights on by simply opening your truck’s tailgate. When you’re done using the lights, close the tailgate and the magnetic switch automatically cuts power to the kit and turns the lights off. This switch will not interfere with the operation of the tailgate.
- Automatically Powers Truck Bed Lights By Opening Tailgate
- Does Not Interfere with Operation of Tailgate
- Includes Magnetic Switch with 13’ of Wire, Magnetic Receiver, Double-Sided Tape & Screws
Using the Cigarette Lighter Adapter is a quick and easy solution to power your interior lighting kit from the cigarette lighter receptacle. This accessory features 3-1/2’ of wiring and also helps you avoid running the kit’s power wires to the vehicle’s battery. Simply crimp the kit’s power and ground wires into the quick-crimp connectors, insert those into the butt-connectors and the adapter into the cigarette lighter port! It’s that easy!
- Powers Interior Lights Directly from the Cigarette Lighter Receptacle
- Includes 3-1/2’ of Wiring with Butt-Connectors & Quick-Crimp Connectors
Using an Expandable Circuit allows you to power your kit from your vehicle’s fuse box without having to cut or splice into your factory wiring. The expandable circuit functions by replacing an existing fuse in the fuse panel to gain power from and then inserting the factory fuse into the open slot on the expandable circuit. The Expandable Circuit features ATO (ATC), Mini, Low Profile Mini, Micro2 and Micro3 fuse sizes, while also including a 4 amp fuse (Micro2 & Micro3 includes 5 amp fuse) for circuit protection.
- Powers Lights from Fuse Box
- Expandable Circuit Sizes: ATO (ATC), Mini, Low Profile Mini, Micro2 & Micro3
- Includes 4 Amp Fuse (Micro2 & Micro3 Includes 5 Amp Fuse)
Adhesion Promoter provides additional strength by creating a stronger bond between the light strip and mounting location that will last over time, rather than just using the provided double-sided tape. This promoter is available from 3 packets all the way up to 18 packets and not required for installation.
- Provides Additional Adhesion Strength Between the LED Light & Mounting Location
- Available from 3, 9, or 18 Promoter Packets
Simple and easy
There's not much to write about other than how simple and easy the kit was to install. Only problem I have with an extra cab the wires aren't long enough.Posted by Unknown on
Thea things are great. I wish I had them installed years ago. Wired them to the auxiliary power switch panel in the truck. Easy install. They work perfectly and light up the entire bed of the truck. Much better than I expected.Posted by firstname.lastname@example.org on
Truck bed lights
Had this installed lights up my truck bed brightPosted by jeff trent on
Lights are perfect. I put them on the cover over the bed so I can see in there at night. Do a lot of RV and store stuff in bed. Didn't use the switch. Went with a Toggle switch that could be installed with a regular drill bit rather than having to figure out how to cut a rectangle for the switch provided.Posted by Unknown on
Super Bright! Super Easy Install!
I just put these on my 2017 tacoma. I cleaned the walls of the truck bed, then used one adhesion promoter to wipe all eight mounting spots. Each of them stuck quickly and they are now on there for good. I ran the wiring just like the install video said to, and then I actually was able to tap into the existing cargo light switch so now all my LED's and my cargo light are all on the same switch. These lights even trun on when I click my lock/unlock buttons. I couldn't be happier. Install took about an hour or so.Posted by Cornelius on