LEDGlow’s redesigned 6pc Flexible Million Color ATV Lighting Kit universally fits 72 ultra-bright SMD LED chips to any ATV. Featuring (6) 6” flexible tubes that can be bent or curved to the desired position, the mounting options are endless. Each lighting tube features 4.5’ of wire maximizing the mounting options using the included 3M™ tape and zip ties.
The redesigned sleek and easy to hide control box features 4 flash patterns, 3 scan modes, 1 color cycle mode and 1 color fading mode. Users can also choose from 15 solid color options that include blue, red, green, orange, purple, pink, white, teal, yellow as well as different shades of those colors. The control box features 6 ports that allow for plug and play connectivity and is about half of the size of the previous version measuring at 2 ¼” x 3 ¼” x ½”. All of the included lighting patterns and colors are easily selected using the included wireless remote. With 4.5’ of power and ground wires included out of the box, this kit can be installed directly to the ATV’s battery.
LEDGlow is offering Adhesion Promoter, which is a liquid primer that creates an extra layer of adhesion between the LED tube and mounting surface of your ATV. Using this adhesion promoter is not required for installation, but allows for a much stronger bond than simply installing the tube with the double-sided tape.
LEDGlow stands by each of its products with a one year limited warranty and free lifetime technical support.
Note: A 12v battery is required to install and operate this product. The control box used for this kit is not waterproof. It must be mounted under the seat or in the driest location possible.
Million Color ATV LED Lighting Kit Includes:
- (72) Ultra-Bright 3014 SMD LEDs
- (12) SMD LEDs per Tube
- (6) 6” Flexible Tubes with 4.5’ of Wire
- (1) Sleek & Easy to Hide Control Box with Wireless Remote
- (15) Solid Colors Include Blue, Red, Green, Orange, Purple, Pink, White, Teal & Yellow with Variations of those Colors
- (4) Flash Patterns
- (3) Scan Modes
- (1) Color Cycle Mode
- (1) Color Fade Mode
- (6) 3M™ Tape Strips
- (12) 3M™ Tape Pads
- (14) Screws
- (6) Zip Ties
- Installation Instructions
- Free Lifetime Technical Support
- One Year Limited Warranty
Adhesion Promoter provides additional strength by creating a stronger bond between the light strip and mounting location that will last over time, rather than just using the provided double-sided tape. This promoter is available from 3 packets all the way up to 27 packets and not required for installation.
- Provides Additional Adhesion Strength Between the LED Light & Mounting Location
- Available from 3, 9, 18, or 27 Promoter Packets