LEDGlow’s Replacement Single Color Wheel Well Control Box will replace the existing control box unit for your Single Color LED Wheel Well Lighting Kit. These control boxes are backwards compatible and will work if your Single Color Wheel Well Kit features 5mm DIP LEDs or SMD LEDs. Please make sure to verify which control box your wheel well light kit is using before purchasing.
The Version 1 Control Box features the LEDGlow logo branded with power, mode and pause buttons on the front and a microphone sensitivity wheel on the right side that allows you to fine tune the featured sound activation mode. The bottom of the control box features 2 lead wires: a solid black wire with a 5.4mm DC plug that connects to the junction box and power and ground wires that connect to a positive 12 volt source and negative source.
The Version 2 Control Box features the LEDGlow logo engraved at the top with 4-ports of positive and negative screw-down terminals that are used for the power and ground wires of the flexible tube. Power and ground lead wires are located at the bottom of the control box. There are no buttons on this control box, only an orange LED that indicates that the kit is powered on. All featured modes are selected with the included pre-programmed wireless remote.